Flexible LED Strips 5050 Range

 

 

 

 

The 5050 LED strips  are supplied on a 5m reel and are available in both IP20 and IP65 (new polyurethane coating) ratings. They come in 30 or 60 LEDs per metre and are available in Pure/Warm White, Red, Green, Blue, Yellow or RGB.

 

The strips have a beam angle of 120˚giving off a wide diffusion of light with a life expectancy of 50,000 hours.

 

Please see below for specification sheets for each of our strips.

 

 

 

LED Flexistrip, LED Components, LED Strp Lighting, 3528 Flexistrip, LED Supplier, Trade suppliers of LED Components, 5050. 3528. 2835. LEDs

Download 5050 IP20 Specification Sheet

Download 5050 IP65 Specification Sheet

LED Flexistrip, LED Components, LED Strp Lighting, 3528 Flexistrip, LED Supplier, Trade suppliers of LED Components, 5050. 3528. 2835. LEDs

Please note that all prices are quoted on the website are ex VAT and do not include delivery. They are correct at time of being entered to the document and are subject to change.

Please note that product photographs and descriptions featured on the site are sometimes used to represent the product and actual products purchased may differ slightly in appearance and specification.

Exact details can be provided at quote stage.

Our full terms and conditions are available on request.

 

Company registration number 07352610

 

VAT registration number 102351767

 

LED Flexistrip, LED Components, LED Strp Lighting, 3528 Flexistrip, LED Supplier, Trade suppliers of LED Components, 5050. 3528. 2835. LEDs

LED FLEXISTRIP - 5050 RANGE

 

 

 

  • Our standard LED strips are 12V, if you intend to wire them to a 240V mains circuit. You must use an appropriate 12V constant voltage LED Driver.

 

  • You cannot exceed a 5 metre length in any one run of LED strip. If you wish to have more than 5m this can be achieved by using more than one driver or wiring back.

 

  • Always use a suitable transformer, do not wire your LED strips to the mains. Always check the driver is large enough to carry your required flexistrip.

 

  • For example:

       5m of IP20 5050, 30 LEDs per metre = 36W - This must have at least a 36W driver.

       5m of IP20 3528, 60 LEDs per metre = 72W - This must have at least a 72W driver, a 36W driver cannot be used.

 

  • LEDs need to be housed on a conductive material or heat sunk. Ie - they are not suitable for sticking straight to wood.

PRODUCT OVERVIEW

PRICELIST REQUEST

Your details were sent successfully!